Product Description:
ADDA Digital Video Transmission Receiver and Transmitter
ADDA is a 5.8G digital video transmission receiver and transmitter. Its input and output are CVBS signals, compatible with various display terminals and analog camera inputs (receiver compatible with Fatshark goggles, SKYZONE goggles, DJI goggles V1/V2, analog displays, and can simultaneously output video signals to an external DVR; camera compatibility includes many analog FPV video transmission cameras on the market). It features low latency and strong anti-interference capabilities, and is widely used in FPV drone flights, outdoor recreation, and professional aerial photography.
Item Specifications
Input Voltage: DC 5V~28V (2~6S)
Number of Channels: 10CH / 0 is a random channel
Frequency Range: 5180-5835MHz
Receiver Sensitivity: -95dBm
Transmit Power: 250mW
Image Delay: As low as 50MS
Antenna Impedance: 50 Ohms
Antenna Interface: Receiver SMA (external thread, internal hole) / Transmitter IPX snap-on
Video Standard: PAL/NTSC
Video Signal Format: CVBS
Operating Temperature: -10℃~+70℃
Receiver Dimensions: 70*42.6*20.3MM (excluding antenna)
Transmitter Dimensions: 38*28*9.2MM (excluding antenna)
Weight: RX: 47.5g TX: 13.5g
Detailed pictures:
Receiver Interface Function Description
TF Card Slot: Currently for software upgrades only. Cannot store data.
DC Power Supply Port: 5-28VIN
Headphone Jack: Video output interface, for direct connection to video glasses with headphone jacks.
6-PIN 1.0MM Cable Connector: Connection order: GND / AV out / GND / 5-28VIN / UART-RX / UART-TX
Antenna SMA: Signal input port with external pressure inner hole.
Transmitter Interface Function Description
6-PIN 1.0MM Connector: Connection sequence: GND / AV NI / GND / 5-28V IN / UART-RX / UART-TX
Antenna: IPX connector
PWRLED: Power indicator
LKLED: Pairing indicator
Packing and Shipping:
Standard shipping
FAQ:
Q: Are you a factory or a trading company?
A: Professional manufacturer for FPV Drones and Accessories, 900+Workers,15000SQMS.
Q: How many can you make for FPV each month?
A: 80,000 PCS FPV Drone each month
Q: What’s the lead-time for 2000pcs FPV Drones?
A: Around 2-3 weeks, but need to check before order
Q: How many samples do you suggest to order?
A:Extrusion damage may occur during transportation. It is recommended to order more than two samples
Q: What about the after-sale service?
A: Free to change if it doesn’t work.
Q: Can you accept OEM?
A: Yes, we can accept OEM, manufacture according to your requirement.
Q: What are your Delivery terms?
A: We accept EXW, FOB, CFR, CIF. You can choose the one which is most convenient or cost effective for you.
Q: What are your main produced items?
A: FPV Drones, Drone parts, Drone accessories, FPV drones Batteries
Q: What is the payment terms?
A: T/T Bank Transfer, L/C, Western union and Trade Assurance.
